صفحه 5 از 42 نخستنخست 123456789101112131415 ... آخرینآخرین
نمایش نتایج: از شماره 41 تا 50 , از مجموع 417

موضوع: موقعیت‌های خالی در دانشگاه‌های خارج از کشور (رعایت قوانین پست اول الزامی است)

  1. #41
    Junior Member
    تاریخ عضویت
    Oct 2012
    ارسال‌ها
    1

    پیش فرض پاسخ : موقعیت‌های خالی در دانشگاه‌های خارج از کشور

    چرا لینک داده شده باز نمی‌شود؟ هنوز زمان داره برای اپلای؟

  2. #42
    Junior Member
    تاریخ عضویت
    Jul 2011
    رشته و دانشگاه
    مهندسی مکانیک
    ارسال‌ها
    40

    پیش فرض پاسخ : موقعیت‌های خالی در دانشگاه‌های خارج از کشور

    سلام خدمت دوستان اپلای ابراد
    یه موقعیت دکترا در دانشگاه مانیتوبا در زمینه ی مدلسازی مواد هست.

    One Ph.D. position is now available for September 2013 or January 2014 on computational materials science in the Department of Mechanical and Manufacturing Engineering at the University of Manitoba. The potential student will work on the mechanical properties in nanoglass and crystalline/amorphous composites. Students with strong interests in atomistic simulations (MD, ab inito, monte carlo, etc.) and good programming skills (C, Fortran, etc.) are encouraged to apply. International applicants please convert your GPA of last 60 credits (normally your MSc and part of your BSc) to a 4.5 scale according to the following guidelines:
    http://umanitoba.ca/faculties/gradua...admin/167.html
    http://umanitoba.ca/faculties/gradua...valencies.html
    A converted GPA of 3.75/4.5 will be considered competitive for this position. Interested students please send a copy of your official transcript and CV and inquires to Prof. Deng at dengc@ad.umanitoba.ca. More details about the research group and position can be found at: http://home.cc.umanitoba.ca/~dengc/index.html

  3. #43

    پیش فرض پاسخ : موقعیت‌های خالی در دانشگاه‌های خارج از کشور

    این پوزیشن تازه باز شده در گروه ما. تا حالا هم هیچ کاندیدایی نداشتیم !

    http://www.ualberta.ca/~amitk/pdfs/2...%20Project.pdf
    دیشب خواب دیدم بزرگ شدم. خواستم برگردم، کفش هایم اندازه ام نبود.

  4. #44
    Junior Member
    تاریخ عضویت
    Aug 2011
    ارسال‌ها
    5

    پیش فرض پاسخ : موقعیت‌های خالی در دانشگاه‌های خارج از کشور

    PhD Positions in Magnetic Resonance Imaging Research of Materials
    Magnetic Resonance (MR) and Magnetic Resonance Imaging (MRI) have been the subject of numerous Nobel prizes in the last fifty years, and they remain very dynamic research areas. MR and MRI have
    revolutionized many different areas of science and engineering. MRI is of course the world’s premier clinical diagnostic imaging method.
    The University of New Brunswick MRI Research Centre is one of the largest and best-known MRI of materials research groups in the world. Located in the Physics department at UNB we are a very inter disciplinary research group with graduate students and post-doctoral fellows from many different departments and faculties.
    We are currently recruiting new PhD students to commence in fall 2013 or winter 2014 in Physics, Electrical Engineering and Mechanical Engineering. The UNB MRI Research Centre has a strong history of graduate students from Iranian Universities and there is a good Iranian community in both the city of Fredericton and the university. If you are interested in joining our lab please check the lab web site http://www.unb.ca/fredericton/science/physics/mri/ then contact Dr. Bruce J. Balcom, Director of the MRI Research Centre at bjb@unb.ca.
    We seek Physics PhD students to undertake work on the development of new MRI measurement methods. We seek Electrical Engineering PhD students to work on new methods of measuring magnetic field gradient waveforms, which are fundamental to the majority of MRI methods. We seek Mechanical Engineering PhD students to undertake work on the design and application of magnetic resonance compatible metallic pressure vessels and core holders.
    In all cases students will find the UNB MRI Centre is a stimulating, hands-on, research environment that is on the leading edge of material science MRI world-wide.

    فرصت های تحصیلی مقطع دکتری در پژوهش تصویرسازی تشدید مغناطیسی (ام آرآی) در مواد
    تشدید مغناطیسی (ام آر) و تصویربرداری تشدید مغناطیسی (ام آر آی) عنوان تعداد زیادی از جوایز نوبل پنجاه سال اخیر بوده است و همچنان به عنوان یکی از زمینه های فعال تحقیقاتی باقی خواهد ماند. ام آر و ام آر آی بسیاری از زمینه های علوم و مهندسی را دگرگون کرده است و مهمترین روش تصویربرداری تشخیصی به شمار می رود.
    مرکز تحقیقات ام آر آی دانشگاه نیوبرانزویک یکی از بزرگترین و مشهورترین گروه های پژوهش ام آر آی مواد در جهان است. این مرکز بین رشته ای در دپارتمان فیزیک این دانشگاه قرار دارد و دانشجویان تحصیلات تکمیلی و پسا دکتری از دانشکده های مختلف در آن پژوهش می کنند.
    ما هم اکنون در حال گرفتن دانشجویان جدید دکتری برای پاییز 2013 یا زمستان 2014 در رشته های فیزیک، مهندسی برق، و مهندسی مکانیک هستیم. مرکز ام آر آی دانشگاه نیوبرانزویک پیش از این دانشجویان تحصیلات تکمیلی زیادی از دانشگاه های ایران داشته است و ایرانیان زیادی نیز در این دانشگاه و همچنین شهر فردریکتون تحصیل و زندگی می کنند. درصورتی که مایل به پیوستن به آزمایشگاه ما هستید لطفا از سایت آزمایشگاه ما بازدید نمایید http://www.unb.ca/fredericton/science/physics/mri/ و سپس با دکتر بروس بالکوم، bjb@unb.ca، مدیر مرکز، مکاتبه کنید.
    ما به دنبال دانشجویان دکتری فیزیک برای توسعه روش های جدید اندازه گیری ام آر آی، دانشجویان دکتری مهندسی برق برای کار روی روش های اندازه گیری شکل موج گرادیان میدان مغناطیسی و دانشجویان دکتری مهندسی مکانیک برای طراجی وبکارگیری ظروف فلزی و نگهدارنده های مغزه های نفتی تحت فشار هستیم.
    دانشجویان، مرکز ام آر آی دانشگاه نیوبرانزویک را محیطی مهیج، پژوهشی و همراه با تجربه عملی در مرزهای دانش کاربرد ام آر آی درعلوم مواد خواهند یافت.

    دوستان ا

  5. #45
    Junior Member
    تاریخ عضویت
    May 2013
    ارسال‌ها
    14

    پیش فرض پاسخ : موقعیت‌های خالی در دانشگاه‌های خارج از کشور

    قابل توجه علاقه مندان هوا فضایی (با گرایش مکانیک پرواز و کنترل) یا مکانیکی (با گرایش دینامیک و کنترل)، موقعیت تحصیل دکتری در زمینه کنترل:
    PhD Position with Financial Support

  6. #46
    Junior Member
    تاریخ عضویت
    Jan 2012
    رشته و دانشگاه
    NUS
    ارسال‌ها
    14

    پیش فرض پاسخ : موقعیت‌های خالی در دانشگاه‌های خارج از کشور

    Ref: DOB/RESEARCH/2013-05-22-1
    Research Fellow – Prototype FPSWizard: A Design Support System to Improve the Selection and Design of Personal Fall Protection Systems
    Job Title: Research Fellow (Case-based reasoning)
    Date posted: May 22, 2013
    Period of employment: Maximum two year contract
    Duties and responsibilities:
    The research fellow will conduct research-related activities such as:
    • Programming in Java and using the software myCBR (http://www.mycbr-project.net/);
    • field work, e.g. observing and recording work-at-height;
    • knowledge engineering, e.g. capturing work-at-height scenarios in case base, and developing similarity scores;
    • compiling literature into EndNote database; and
    • conducting interviews and focus group discussions.
    Minimum Requirements:
    • PhD;
    • programming experience; and
    • academic writing experience.
    Remuneration:
    • Salary will commensurate with the candidate’s qualification and experience.
    Other Details:
    • Candidates with the following experience or knowledge will be preferred:
    o case-based reasoning;
    o publications in peer-reviewed journals; and
    o work experience in construction or other heavy industry.
    Contact details for further information:
    • Dr Goh Yang Miang; bdggym@nus.edu.sg; +65 6601 2663

  7. #47
    Junior Member
    تاریخ عضویت
    Jan 2012
    رشته و دانشگاه
    NUS
    ارسال‌ها
    14

    پیش فرض پاسخ : موقعیت‌های خالی در دانشگاه‌های خارج از کشور

    Ref: DOB/RESEARCH/2013-05-22-2
    Research Fellow – Prototype FPSWizard: A Design Support System to Improve the Selection and Design of Personal Fall Protection Systems
    Job Title: Research Fellow (Engineering design of fall protection system)
    Date posted: May 22, 2013
    Period of employment: Maximum two year contract
    Duties and responsibilities:
    The research fellow will conduct research-related activities such as:
    • Field work, e.g. observing and recording work-at-height;
    • engineering design of fall protection systems, e.g. horizontal lifeline and vertical lifeline;
    • develop MS Excel templates to facilitate calculation of fall clearance and impact force;
    • use ABAQUS to validate the results in the MS Excel;
    • compile literature into EndNote database; and
    • conduct interviews and focus group discussions.
    Minimum Requirements:
    • PhD;
    • experience with ABAQUS and MS Excel; and
    • academic writing experience.
    Remuneration:
    • Salary will commensurate with the candidate’s qualification and experience.
    Other Details:
    • Candidates with the following experience or knowledge will be preferred:
    o Design of system with impact load;
    o publications in peer-reviewed journals; and
    o work experience in construction or other heavy industry.
    Contact details for further information:
    • Dr Goh Yang Miang; bdggym@nus.edu.sg; +65 6601 2663

  8. #48
    ApplyAbroad Superstar
    تاریخ عضویت
    Apr 2013
    ارسال‌ها
    3,171

    Cool پاسخ : موقعیت‌های خالی در دانشگاه‌های خارج از کشور

    Ph.D. in Micro fluidics
    Optofluidic sensors for high-throughput lab-on-a-chip flow cytometry

    The Mads Clausen Institute invites applications for a PhD fellowship in Sønderborg. The position is available starting 1. July 2013 or as soon as possible thereafter.The miniaturization of biological and chemical techniques and their integration with optical and electronic sensors has already begun to lead to new smaller cheaper instrumentation and even consumer products in the fields of medical diagnosis and bioanalytics. In this project we investigate lab-on-chip devices for high-throughput applications such as bacterial contamination monitoring in industrial food production or rapid automated drug screening. Solutions based on flow cytometry are especially suited to these applications. It is based on continuous fluid flows and rapid multi-parameter measurements on individual biological cells. The main challenges in such devices are automation of flow control, and enhancement of optical fluorescence measurement sensitivity.Skills and qualifications
    The ideal candidate will have a broad skill base. This will include sound knowledge of optics and sensors, experience in fabrication and design of microfluidic systems and some experience of nano and microfabrication in a cleanroom environment. Good knowledge of electronics and programming would also be beneficial. The project is predominantly experimental and the candidate should have excellent design and workshop skills and be able to demonstrate aptitude for developing and prototyping experimental setups. The successful candidate must have obtained an M.Sc. in engineering, applied physics, or a related discipline.

    We offer
    The applicants will enjoy working in an international and cross-disciplinary research team involving both scientific and industrial partners. English is the operational language of the project and department. The Mads Clausen Institute is situated at Sønderborg campus of SDU.

    Further information is available from the Head of Institute Horst-Günter Rubahn at phone: +45 6011 3517, email: rubahn@mci.sdu.dk

    Application, salary and conditions of employment etc.
    A PhD Fellowship is a 3-year position. Employment stops automatically by the end of the period. The PhD Fellow is not allowed to have other paid employment during the three-year period.

    Applications will be assessed by an expert committee. Applicants will be informed of their assessment by the Faculty.

    As part of the overall assessment of the applicant’s qualifications, an interview may be applied.

    Employment is governed by the Protocol on PhD Research Fellows signed by the Danish Ministry of Finance and AC (the Danish Confederation of Professional Associations) March 26th 2012, enclosure 5, Cirkulære om overenskomst for Akademikere i staten 2012

    Applications must be submitted electronically using the link below. Attached files must be in Adobe PDF or Word format. The Faculty expects applicants to read the information “How to apply” before applying.

    Each box can only contain a single file of max. 10 Mb.

    An application must include:

    • A curriculum vitae
    • Letter stating your interest, motivation ect.
    • Diplomas/certificates
    • Relevant publications. Please attach one pdf file for each publication, a possible co-author statement must be a part of this pdf file

    The University encourages all interested persons to apply, regardless of age, gender, religious affiliation, or ethnic background.

    Further information about the PhD programme at the Faculty of Engineering can be found here.
    Campus:
    Sønderborg
    Application deadline:
    12/06/2013

  9. #49
    Junior Member
    تاریخ عضویت
    Aug 2013
    ارسال‌ها
    1

    پیش فرض پاسخ : موقعیت‌های خالی در دانشگاه‌های خارج از کشور

    PhD Position in Computational Modeling of Materials at The Ohio State University

    Description: The Automated Computational Mechanics Laboratory (ACML) in the Department of Mechanical and Aerospace Engineering at The Ohio State University has one open PhD position for Spring 2014. The research in ACML is focused on the implementation of advanced finite element and meshfree methods for the computational modeling of materials with complex geometries, corrosion, damage/fracture mechanics, and multi-physics simulations. Outstanding applicants with interests and strong background in computational mechanics experience in C++ programming are encouraged to apply immediately. Please also send a copy of your CV and the contact information of three references to Dr. Soheil Soghrati (Soghrati.1@osu.edu)

    http://mae.osu.edu/people/soghrati.1

  10. #50

    پیش فرض پاسخ : موقعیت‌های خالی در دانشگاه‌های خارج از کشور

    سلام دوستان عزیز
    موقعیت خالی برای دانشجوی فوق دکترا (Post-Doc) در رشته مهندسی مکانیک میشناسم.
    نام دانشگاه: Pusan National University
    کشور: South Korea
    مبلغ فاند: 1500 USD ماهیانه
    شرایط: داشتن مدرک دکترای مکانیک
    لطفا در صورتی که خودتان یا دوستتان شرایط لازم را دارید، رزومه خود را تا قبل از 20 سپتامر برای من بفرستید.
    ****
    موفق باشید . رحم دل
    ویرایش توسط rmojtaba : July 17th, 2015 در ساعت 02:27 AM دلیل: ذکر ایمیل شخصی خلاف مقررات فروم است

علاقه مندی ها (Bookmarks)

علاقه مندی ها (Bookmarks)

مجوز های ارسال و ویرایش

  • شما نمیتوانید موضوع جدیدی ارسال کنید
  • شما امکان ارسال پاسخ را ندارید
  • شما نمیتوانید فایل پیوست در پست خود ضمیمه کنید
  • شما نمیتوانید پست های خود را ویرایش کنید
  •