موقعیت خالی برای دانشجوی مکانیک در دانشگاه Pusan National University
سلام دوستان عزیز
چند موقعیت خالی برای دانشجوی فوق دکترا (Post-Doc) در رشته مهندسی مکانیک میشناسم.
نام دانشگاه: Pusan National University
کشور: South Korea
مبلغ فاند: 1500 USD ماهیانه
شرایط: داشتن مدرک دکترای مکانیک
لطفا در صورتی که خودتان یا دوستتان شرایط لازم را دارید، رزومه خود را تا قبل از 20 سپتامر برای من بفرستید.
********
موفق باشید . رحم دل
ویرایش توسط میلاد : September 17th, 2013 در ساعت 10:38 PM
پاسخ : موقعیتهای خالی در دانشگاههای خارج از کشور
PhD: University of Louisiana at Lafayette, USA
Contributed by: Afef Fekih (afef.fekih@louisiana.edu)
The Advanced Controls Laboratory at the University of Louisiana at Lafayette, USA has available funding to support a PhD student in the general area of Fault Tolerant Control design/Fault Detection and Identification with application to dynamic systems. The successful candidate is expected to have a strong background in control systems theory, fault tolerant control design and system identification via Neural Networks. Good programming skills and experience with MATLAB/Simulink is an asset.
Applicant to this position should already have completed (or will soon complete) a Masters degree in systems and controls, electrical engineering, power systems, and/or computer engineering. The funding covers the cost of full tuition and stipends at a competitive rate and will start in Spring 2014. The position will remain open until filled.
Interested individuals should send their detailed curriculum vitae, copies of their recent transcripts, a copy of their best publication in English, and if applicable GRE/test scores to Dr. Afef Fekih (afef.fekih@louisiana.edu).
پاسخ : موقعیتهای خالی در دانشگاههای خارج از کشور
قابل توجه علاقه مندان هوا فضایی (با گرایش مکانیک پرواز و کنترل) یا مکانیکی (با گرایش دینامیک و کنترل)، موقعیت تحصیل دکتری در زمینه کنترل در آمریکا: PhD Student Position with Financial Support
پاسخ : موقعیتهای خالی در دانشگاههای خارج از کشور
یک موقعیت دکترا در دانشگاه کمبریج انگلستان با بورس:
رشته: مکانیک، مهندسی شیمی، فیزیک و ریاضی
موضوع: Develop numerical models of the entrainment of the particles of a dry powder drug formulation in an air stream for potential inhaler geometries
شروع دوره اکتبر 2014
معدل بالای 16.60
University of Southern California (USC) Aerospace, Aeronautical and Astronautical Engineering
ارسالها
205
پاسخ : موقعیتهای خالی در دانشگاههای خارج از کشور
جهت اطلاع دوستان علاقمند به رشته های مهندسی : دانشگاه کنونی من ( که دکترا میگیرم ) یعنی State University of New York , Binghamton در شمال نیویورک به دانشجویان مهندسی چنانچه نمره تافل بالای 85 و GRE درحدود 300 دارند به راحتی پذیرش میده ( هم مستر- هم دکترا) و در حال حاضر هم تعدادی دانشجوی ایرانی مشغول به تحصیل هستند . در بیشتر موارد دانشجویان دکترا فاند کامل میگیرند . اگر مایل هستید سریعا اپلای کنید . من اطلاعات بیشتری ندارم فقط گفتم یک آماری داده باشم . بقیه اطلاعات را با وارد شدن به سایت دانشگاه بدست بیارید. (مهندسی صنایع و سیستم - مهندسی برق و الکترونیک- مهندسی مکانیک - مهندسی مواد - مهندسی پزشکی - مهندسی کامپیوتر و علم کامپیوتر ) . بسیاری از دوستان میپرسند اول اپلای کنیم و یا اول با استاد تماس بگیریم من توصیه میکنم اول اپلای کنید چرا که بدون اپلای کردن مکاتبات را جدی نمیگیرند . پس اگر نمره تافل و GRE تون در این اشل هست معطل نکنید . گفتم به هموطن بگم قبل از اینکه این چینی ها و هندی ها و عربها و ترکها پوزیشن های ترمهای آینده رو بگیرند.
پاسخ : موقعیتهای خالی در دانشگاههای خارج از کشور
Research Scientist in Numerical Modelling of Fluid Flow in Manufacturing Processes
DTU, Department of Mechanical Engineering, the section for Manufacturing Engineering has a vacant position as research scientist in the field of numerical modelling of fluid flow in manufacturing processes. The position is to be filled as soon as possible.
Responsibilities and tasks
The applicant should in general have a strong competence in numerical heat and mass transfer applied to manufacturing processes. Furthermore, the candidate should have demonstrated the ability to develop and maintain academic collaboration with external partners.
Qualifications
Candidates should have a PhD degree or equivalent. Furthermore, the candidates must have:
Knowledge of coupled heat and mass transfer applied to local climate conditions in enclosures
Knowledge of flow in porous media
General knowledge of manufacturing technology
Experience in collaboration with external partners form both academia as well as indsutry
Assessment
In the assessment of the candidates consideration will be given to
scientific production and research potential at international level
innovative skills and the ability to generate new ideas
the ability to communicate at all levels such as the provision of scientific advice to public sector authorities
an all-round experience basis, preferably including international experience
the ability to contribute to development of the department’s internal and external cooperation
We offer
We offer an interesting and challenging job in an international environment focusing on education, research, public-sector consultancy and innovation, which contribute to enhancing the economy and improving social welfare. We strive for academic excellence, collegial respect and freedom tempered by responsibility. The Technical University of Denmark (DTU) is a leading technical university in northern Europe and benchmarks with the best universities in the world.
Salary and terms of employment
The appointment will be based on the collective agreement with the Confederation of Professional Associations. The allowance will be agreed with the relevant union.
The post of research scientist is a permanent post as part of which the employee after a maximum of 4 years transfers to a position as senior research scientist provided that the employee is recommended for assessment and is deemed qualified.
Further information
Further information may be obtained from Professor Jesper Hattel, tel: [IMG]resource://skype_ff_extension-at-jetpack/skype_ff_extension/data/call_skype_logo.png[/IMG]+45 4525 4710.
You can read more about Department of Mechanical Engineering on www.mek.dtu.dk.
Application procedure:
Please submit your online application no later than February 3rd 2015. Applications must be submitted as one PDF file containing all materials to be given consideration. To apply, please open the link "Apply online," fill in the online application form, and attach all your materials in English in one PDF file. The file must include:
Application (cover letter)
CV
Diploma (MSc/PhD – an official translation into English)
List of publications
Applications and enclosures received after the deadline will not be considered.
All interested candidates irrespective of age, gender, disability, race, religion or ethnic background are encouraged to apply.
DTU Mechanical Engineering covers the fundamental engineering disciplines within Solid mechanics, Fluid mechanics, Coastal and Maritime Engineering, Energy systems and energy conversion, Materials and Surface Engineering, Manufacturing Engineering, Engineering design and Product development. The department has a scientific staff of about 100 persons, 115 PhD students and a technical/administrative support staff of more than 80 persons.
DTU is a technical university providing internationally leading research, education, innovation and public service. Our staff of 5,700 advance science and technology to create innovative solutions that meet the demands of society; and our 10,000 students are being educated to address the technological challenges of the future. DTU is an independent academic university collaborating globally with business, industry, government, and public agencies.
علاقه مندی ها (Bookmarks)