صفحه 5 از 26 نخستنخست 123456789101112131415 ... آخرینآخرین
نمایش نتایج: از شماره 41 تا 50 , از مجموع 252

موضوع: تالار معرفی و اعلام زمان هاي كنفرانس هاي داخلي و خارجي به منظور فرستادن مقاله

  1. #41
    Junior Member
    تاریخ عضویت
    Sep 2008
    ارسال‌ها
    19

    پیش فرض پاسخ : تالار اعلام زمان هاي كنفرانس هاي داخلي و خارجي به منظور فرستادن مقاله

    [quote=damoon ]
    [quote=damoon ]
    [quote=damoon ]
    نقل قول نوشته اصلی توسط shahrouz
    نقل قول نوشته اصلی توسط salam_to_all
    نقل قول نوشته اصلی توسط maryamgoli
    سلام دوستان
    هدف از ايجاد اين موضوع اين هست كه از تاريخ هاي برگذاري كنفرانس هاي مختلف ( داخلي و خارجي) براي رشته هاي مختلف به منظور ارايه مقالاتمون اطلاع يابيم.
    من به دنبال كنفرانس هاي در پيش رو براي ارسال مقاله در زمينه هاي شيمي، مهندسي شيمي، مواد و كنفرانس هاي مرتبط مي باشم. لطفا اگه اطلاعاتي در اين زمينه داريد، بفرماييد
    با تشكر
    درود
    کنفرانسهای مرتبط با شیمی و علم مواد
    (ادامه)

    آلمان

    Bunsentagung 2009 — Physical Chemistry of Solids: The Science behind Materials Engineering
    21 May 2009 → 23 May 2009; Cologne, Germany
    weblink: http://www.bunsen.de/kalender.htm

    related subject(s): Chemical Engineering; Physical Chemistry


    آفریقای جنوبی


    6th International Symposium on Technetium and Rhenium-Science and Utilization
    07 Oct 2008 → 10 Oct 2008; Port Elizabeth, South Africa
    organizer: Nelson Mandela Metropolitan University Chemistry Department
    weblink: http://www.nmmu.ac.za/ist2008

    contact: Thomas Gerber, Nelson Mandela Metropolitan University, University Way, Summerstrand, Port Elizabeth, 6031, South Africa; phone: (+2704105044285)
    فرانسه

    18th European Conference on Thermophysical Properties
    31 Aug 2008 → 04 Nov 2008; Pau, France
    abstract: The objective of the conference is to provide a forum for academic and industrial researchers to meet and exchange valuable experiences in the field of thermophysical properties of a wide variety of systems covering fluids and solids.
    topics: thermal conductivity, diffusivity, electrical conductivity, viscosity and non-Newtonian properties, massdiffusion and thermo-diffusion, optical and radiative properties including emissivity, reflectivity and absorptivity, solubility, phase equilibrium including liquid - solid, calorimetric and volumetric properties, speed of sound, interfacial properties including solid-solid and wettability,
    weblink: http://ectp.univ-pau.fr/

    related subject(s): Chemoinformatics and Computational Chemistry; Conden
    sed Matter Physics and Materials


    فنلاند

    ICCST-11 — Eleventh International Conference on the
    Chemistry of Selenium and Tellurium
    01 Aug 2010 → 06 Aug 2010; Oulu, Finland
    weblink: http://
    www.oulu.fi

    contact: Professor Risto Laitinen, Department of Chemistry P.O. Box 3000 University of Oulu Oulu 90014 Finland; phone: (+358 8 5531611)
    related subject(s): Analytical Chemistry


    لهستان
    E-MRS 2008 — European Materials Research Society Fall Meeting
    15 Sep 2008 → 19 Sep 2008; Warsaw, Poland
    weblink: http://www.e-mrs.org/meetings/fall2007/

    contact: Conference Secretariat, Faculty of Materials Science and Engineering, 141 Woloska Street, 02-507 Warsaw, Poland; phone: (+48 22 6608441)
    related subject(s): Condensed Matter Physics and Materials; Applied Physics: Mechanics, Rheology and Tribology
    REMAT — 1st International Conference on Rare Earth Materials
    21 Sep 2008 → 26 Sep 2008; Trzebieszowice, Poland
    weblink: http://apollo.int.pan.wroc.pl/remat2008/default.html

    contact: Institute of Low Temperature and Structure Research, ul. Okólna 2, 50-422 Wroclaw, Poland; phone: (+48 71 343 5021)

    چین

    TiEXPO — International Exhibition on Titanium, Zr & Hf 2008
    05 Nov 2008 → 06 Nov 2008; Beijing, China
    weblink: http://www.tiexpo.net/2008-e-1.html

    contact: Hero Exposition Corp., Rm. 6A12, Changyin Building, No. 88 Yongding Rd, Beijing, 100039 China ; phone: (86 10 5889 5318)
    related subject(s): Condensed Matter Physics
    and Materials


    هند

    ISMC 2008 — 2nd International Symposium on Materials Chemistry
    02 Dec 2008 → 06 Dec 2008; Mumbai, India
    topics: Nuclear materials (fuels, fission products, glasses, synroc., etc); Fuel cells materials; Materials for hydrogen generation and storage; High purity materials; Thin films; Nano materials and clusters; Magnetic materials; Carbon based materials; Materials for catalysis; Soft condensed materials and surface chemistry; Chemical sensors; Computational research in materials chemistry.
    weblink: http://www.barc.gov.in/symposium/ismc-08/

    contact: Chemistry Division BARC, Trombay, Mumbay 400085, India; phone: (+91-022-2559 5102)
    related subject(s): Nuclear Energy and Radwaste

    H3 — International Conference on "Hydrogen & Hydrogen Storage - Methods & Materials"
    03 Jan 2009 → 06 Jan 2009; Bangalore, India
    abstract: The Division of Chemical Sciences at the Indian Institute of Science, Bangalore, India will be organizing an International Conference entitled "Hydrogen and Hydrogen Storage - Methods and Materials" during January 03-06, 2009 in celebration of the institute's centenary. The areas that will be covered during this conference include metal hydrides, hydrogenation catalysis, and hydrogen storage/generation.
    topics: hydrogen, dihydrogen, metal hydrides, metal hydride complexes, dihydrogen complexes, metal dihydrogen complexes, hydrogenation catalysis, hydrogen storage, hydrogen generation, hydrogen storage materials
    weblink: http://ipc.iisc.ernet.in/~H3_2009/
    انسان واقعي كسي است كه خواست ونخواست خود را مي آفريند و آنچه را كه مي خواهد به او تزريق شود را رد مي كند. او كسي است كه روياروي تمام خطرها و بدبختي هاي زندگي قرار مي گيرد . اراده او همان آزادي است. قدرت آنچه مي خواهد و قدرت آنچه نمي خواهد.<br />&quot;نيچه&quot;

  2. #42
    Junior Member
    تاریخ عضویت
    Sep 2008
    ارسال‌ها
    19

    پیش فرض پاسخ : تالار اعلام زمان هاي كنفرانس هاي داخلي و خارجي به منظور فرستادن مقاله

    درود
    كنفرانسهاي مرتبط با مهندسي شيمي

    كانادا از 19 اكتبر 2008

    Chemical Engineering Conference
    19 Oct 2008 → 22 Oct 2008; Ottawa, Canada
    abstract: Technical Sessions: Biomedical Engineering Biomaterials Cell and Gene Therapy Regenative Medicine Therapeutic Delivery Tissue Engineering Chemical Engineering Education Chemical Education Curriculum Design Approaches Innovative Approaches Teaching: Best Practices Forum Energy Hydrogen Natural Gas and Fuel Processing Oil and Gas Oil Sands and Heavy Oil Fundamentals Adsorption (In Honour of Douglas M. Ruthven and Jörg Kärger) Fluid Dynamics Heat and Mass Transfer Separation Processes Thermodynamics Transport Processes Polymers and New Materials Composites Extrusion Membrane Technologies Polymer Processing Polymer Reaction Engineering Thin Films Process Dynamics, Control and Statistics Applied Statistical Methods Optimization Process Control Process Integration Simulation and Modelling System Identification Process Safety and Loss Management En
    weblink: http://www.chemeng.ca/csche2008

    CSChE 2008 — 58th Canadian Chemical Engineering Conference
    19 Oct 2008 → 22 Dec 2008; Ottawa, ON, Canada
    weblink: http://www.csche2008.ca/index.cfm/ci...12/la_id/1.htm

    CSChE 2008 — 58th Canadian Chemical Engineering Conference
    19 Nov 2008 → 22 Nov 2008; Ottawa, ON, Canada
    topics: Energy for a Sustainable Society: Alternative Fuels, Clean Coal Technology, CO2 Capture and Storage, Energy from Waste, Fuel Cells, Hydrogen Storage, Life Cycle Analysis of Energy Processes, Nuclear Energy, Process Intensification, Reactor Engineering for Biomass Feedstocks; Materials for a Sustainable Society: Biopolymers, Cellulosic Feedstocks, Ecomaterials, Nanotechnology and Self-Assembled Materials, Sustainable Biorefineries, Value-Added Chemicals; Clean Water?Clean Air?Clean Earth: Air Quality Improvement Technologies, Bioremediation, Clean Tech, Environmental Biotechnology, Pollution Prevention, Process Intensification and Water Resources Management, Waste Management, Water Treatment; Industrial Biotechnology: Bioinformatics, Bioseparations and Systems Engineering, Cell Culture, Enzyme Technologies, Fermentation, Food Processing, Pharmaceutical Processing; Partnerships - Policy and Research at the Crossroads: to Research, Industry-Research Partnerships, International Research Collaboration Strategies??Going Global,? Process Safety Partnerships, Public Acceptance of Transformative Technologies, Technology Transfer.
    weblink: http://www.chemeng.ca/csche2008

    contact: The Chemical Institute of Canada, 130 Slater Street, Suite 550, Ottawa, Ontario, Canada K1P 6E2; phone: (+1 613-232-6252)

    The Scale-Up of Chemical Processes
    07 Jul 2009 → 10 Jul 2009; Vancouver, British Columbia, Canada
    abstract: This is the major international forum for the discussion of technical aspects of scale-up at the chemistry/chemical engineering interface. Topics include: the scale up of batch and semi-batch processes, continuous processing and reaction engineering, microreactor technology, safety and thermochemistry, scale up of potentially hazardous chemistry, green chemistry, quality assurance and regulatory concerns, solid form control (crystallisation and polymorphism), separation and purification techniques, and new technologies and equipment for large scale manufacture.
    topics: Organic Chemistry
    weblink: http://www.scientificupdate.co.uk

    contact: phone: (0044 (0)1435 873062)
    related subject(s): Industrial Chemistry


    8th World Congress of Chemical Engineering
    23 Aug 2009 → 27 Aug 2009; Montreal, Quebec, Canada
    weblink: http://www.wcce8.org/index.cfm/ci_id/4158/la_id/1.htm

    contact: 8th World Congress of Chemical Engineering 130 Slater Street, Suite 550, Ottawa, ON K1P 6E2, Canada; phone: (+1 613-232-6252)

    WCCE8 — 8th World Congress of Chemical Engineering
    23 Aug 2009 → 29 Aug 2009; Montréal, QC, Canada
    abstract: Canada and Montréal will welcome the international chemical engineering community to the 8th World Congress of Chemical Engineering (WCCE8), at the downtown Palais des Congrès de Montréal, August 23 to 27, 2009. WCCE8’s technical program will emphasize the key role played by chemical engineers from all around the world in developing the processes and products needed by humanity in a more sustainable way—as highlighted in the Congress’s overall theme “Challenges for a Changing World”.
    weblink: http://www.wcce8.org/index.html


    XXIV Interamerican Congress of Chemical Engineering
    23 Aug 2009 → 29 Aug 2009; Montréal, QC, Canada
    weblink: http://www.wcce8.org/index.html


    CSChE 2009 — 59th Canadian Chemical Engineering Conference
    23 Aug 2009 → 29 Aug 2009; Montréal, QC, Canada
    weblink: http://www.wcce8.org/index.html


    CSChE 2010 — 60th Canadian Chemical Engineering Conference
    17 Oct 2010 → 20 Oct 2010; Saskatoon, SK, Canada
    weblink: http://www.cheminst.ca/index.cfm?ci_id=3856&la_id=1


    CSChE 2011 — 61st Canadian Chemical Engineering Conference
    23 Oct 2011 → 26 Oct 2011; London, ON, Canada
    weblink: http://www.cheminst.ca/index.cfm?ci_id=3856&la_id=1
    انسان واقعي كسي است كه خواست ونخواست خود را مي آفريند و آنچه را كه مي خواهد به او تزريق شود را رد مي كند. او كسي است كه روياروي تمام خطرها و بدبختي هاي زندگي قرار مي گيرد . اراده او همان آزادي است. قدرت آنچه مي خواهد و قدرت آنچه نمي خواهد.<br />&quot;نيچه&quot;

  3. #43
    Junior Member
    تاریخ عضویت
    Sep 2008
    ارسال‌ها
    19

    پیش فرض پاسخ : تالار اعلام زمان هاي كنفرانس هاي داخلي و خارجي به منظور فرستادن مقاله

    نقل قول نوشته اصلی توسط damoon
    درود
    كنفرانسهاي مرتبط با مهندسي شيمي
    (ادامه)

    آمريكا از 17 اكتبر 2008

    ACS Webcast Short Course — Beaker to Barrel: Chemical Engineering for Chemists
    19 Sep 2008 → 17 Oct 2008; online, United States
    organizer: American Chemical Society
    abstract: Learn how to apply chemical engineering knowledge to further your bench-grade process and understand important chemical engineering principals including thermodynamics, material balance, reactor design, and more. This course will be useful for those who need to negotiate and interact with chemical engineers and who need to appraise the industrial feasibility of their newly conceived chemical process.
    topics: Chemical Engineering
    weblink: http://portal.acs.org/portal/PublicW...ses/CTP_005374

    related subject(s): Professional Training Events in Chemistry

    International Conference on Chemical Engineering 2008
    22 Oct 2008 → 24 Oct 2008; San Francisco, California, United States
    abstract: The conference ICCE'08 is held under the World Congress on Engineering and Computer Science WCECS 2008. The WCECS 2008 is organized by the International Association of Engineers (IAENG), a non-profit international association for the engineers and the computer scientists. The congress has the focus on the frontier topics in the theoretical and applied engineering and computer science subjects. The last IAENG conference in 2006 has attracted more than four hundred participants from over 30 countries. All submitted papers will be under peer review and accepted papers will be published in the conference proceeding (ISBN: 978-988-98671-0-2). The abstracts will be indexed and available at major academic databases. The accepted papers will also be considered for publication in the special issues of the journal Engineering Letters, in IAENG journals and in edited books.
    weblink: http://www.iaeng.org/WCECS2008/ICCE2008.html

    Organic Process Research & Development
    27 Apr 2009 → 30 Apr 2009; Fort Lauderdale, Florida, United States
    abstract: This conference brings together chemists and engineers from all parts of the world to discuss issues related to synthetic route design, development and optimisation and the scale-up of these processes. The invited speakers are selected to emphasise their companies approach to these issues with detailed case studies.
    topics: Organic Chemistry
    weblink: http://www.scientificupdate.co.uk

    contact: phone: (0044 (0)1435 873062)
    related subject(s): Organic Chemistry and Polymers


    اسپانيا از 4 نوامبر 2008

    A Chemist's
    Guide to Chemical Engineering
    04 Nov 2008 → 07 Nov 2008; Barcelona, Spain
    organizer: Scientific Update LLP
    contact: Mrs Karen Thurley, Scientific Update LLP Maycroft Place Stone Cross Mayfield TN20 6EW United Kingdom; phone: (0044 (0)1435 873062); email: sciup@scientificupdate.co.uk
    Safety and Selectivity in the Scale Up of Chemical Reactions
    16 Jun 2009 → 17 Jun 2009; Barcelona, Spain
    abstract: The aim of the course is to give lab chemists an understanding of the issues that need to be considered during the early stages of scale up to large laboratory scale equipment (10-20 litre vessels) / kilo lab. The course will concentrate on chemical safety and selectivity issues and include information on what safety testing equipment is available and the uses and limitations of this equipment. Attendees will learn how to identify potential problems whether they be thermal hazards or selectivity issues. Methods used by other companies for handling hazardous reagents and reactions will be described as well as alternative chemistry to circumvent these reactions and/or reagents
    topics: Organic Chemistry
    weblink: http://www.scientificupdate.co.uk

    contact: phone: (0044 (0)1435 873062)
    related subject(s): Industrial Chemistry

    آلمان (23 مي 2009)

    Bunsentagung 2009 — Physical Chemistry of Solids: The Science behind Materials Engineering
    21 May 2009 → 23 May 2009; Cologne, Germany
    weblink: http://www.bunsen.de/kalender.htm
    related subject(s): Chemicals and Materials Science; Physical Chemistry


    ايتاليا ( از 14 ژوئن 2009)

    [
    pre]EPIC 2009 — 2nd European Process Intensification Conference
    14 Jun 2009 → 17 Jun 2009; Venice , Italy
    abstract: With the first edition of the EPIC 2007 (European Process Intensification Conference), EFCE (European Federation of Chemical Engineering) Working Party on Process Intensification (PI) has launched a new series of biannual European conferences focused on Process Intensification (PI). “Process Intensification provides radically innovative principles in process and equipment design which can benefit process and chain efficiency, capital and operating expenses, quality, wastes, process safety and more” (from the study “European Roadmap for Process Intensification”, 2008).
    PI is a new approach to process and plant design that greatly contributes to increase the economic and environmental sustainability through resources minimization (energy and feedstock), improved environmental and safety performance.
    EPIC 2009 represents a great opportunity for the participants (scientists, researchers, practitioners, and technology providers) to discuss and share experiences on the current-status of the field, the latest developments, and the future needs. The conference focuses primarily on illustrating and discussing how the interactions among phenomena, equipments, and operations can contribute to enhance the processing performance efficiency. Contributions discussing innovative concepts and ideas, application-oriented technologies, and interdisciplinary research are welcome.
    EPIC 2009 will be jointly organized with GPE 2009 because the two conference objectives integrate themselves. While GPE mainly focuses on the processes and technologies that provide the tools for “green chemistry”, EPI tackles the methodologies and technologies that result in improved sustainability, efficiency and environmental performance.
    topics: Non-reactive (e.g., structured internals for mass transfer operations, static mixers);; Structured catalyst-based reactors (e.g., catalytic foam reactors, monolith reactors); Microreactors (including micromixers); Membrane reactors (non-selective); Static mixer-reactors; Multifunctional separations (e.g., reactive distillation, adsorptive distillation, membrane hybrid systems); Multifunctional reactors (e.g., membrane selective reactors, reactive adsorption, reactive condensation, reactive crystallization/precipitation); Rotating (e.g., HiGee devices, spinning disk reactors); Impulse (e.g., pulsed pressure reactors, sonochemical reactors, ultrasound enhanced crystallization); Electromagnetic (e.g., microwave enhanced operations, photochemical reactors); Periodic operations of reactors; Reverse flow reactors; Pulsing operations of reactors; Process Analytical Technologies (PAT); Process modelling; Process control
    weblink: http://www.gpe-epic2009.org/

    related subject(s): Industrial Chemistry

    GPE 2009 — 2nd International Congress on Green Process Engineering
    14 Jun 2009 → 17 Jun 2009; Venice , Italy
    abstract: Green Process Engineering - Environmentally Conscious Design of Chemical Processes - is one facet of the broad issue of sustainability. It provides some answers to the question "How can chemical engineering practice and technology help to move the products and processes towards sustainability?" Green Process Engineering is based on the design and use of processes and products, which are feasible and economical, whilst minimizing pollution and risks to human health and the environment.
    This second event is coupled with EPIC 2009 and both are supported by EFCE (European Federation of Chemical Engineering). It will be held in spring 2009 in Venice.
    Focused on Process Engineering, the congress provides a unique opportunity for discussion between chemical engineers and scientists of various chemical disciplines in order to favor synergies between innovative chemical routes and new application technologies. This conference also aims at bringing together leading international researchers from industry, academia, and governmental institutions to discuss the current status of the field, as well as to assess the progress of "green product design" and the advances in the integration of green engineering into global solutions for sustainability.
    topics: Sustainable and clean technologies; Ultrasonic processes; Microwave assisted processes; Electrochemical processes; Catalysis (including biocatalysis) and reaction engineering; Photochemical processes; Membrane processes; New reaction media, green solvents in chemical processes; Water as a solvent for chemical syntheses; Neoteric solvents (supercritical fluids (CO2), ionic liquids …); Solvent-free chemical systems; Innovative process design for green chemical engineering applications; Experimental design; Optimal design; Intensification (mini, micro devices); Reaction/separation coupling; New operating modes (cyclic processes, periodic flow reversal, stagewise reactant, feeding…); Green product design; Risk management and safety; Systems approaches for green engineering; Life cycle assessment; Integrated approach in supply chain management; Multi-scale integrated approach for process modeling; New tools for green chemical engineering education and operator training
    weblink: http://www.gpe-epic2009.org/

    related subject(s): Industrial Chemistry[/code]
    انگلستان

    Secrets of Batch Process Scale-Up
    21 Apr 2009 → 23 Apr 2009; London, United Kingdom
    abstract: Operating a commercially viable chemical process requires a good chemical synthesis to start with, but is also subject to the interplay of a myriad of important physical phenomena, traditionally the realm of the chemical engineer. An understanding of these scale-up phenomena is crucial for the laboratory development of processes that will scale successfully. This course presents an overview of these issues, giving guidance as to how to ensure effective translation of laboratory processes to pilot plant scale.

    topics: Organic Chemistry
    weblink: http://www.scientificupdate.co.uk
    contact: phone: (0044 (0)1435 873062)
    related subject(s): Industrial Chemistry
    انسان واقعي كسي است كه خواست ونخواست خود را مي آفريند و آنچه را كه مي خواهد به او تزريق شود را رد مي كند. او كسي است كه روياروي تمام خطرها و بدبختي هاي زندگي قرار مي گيرد . اراده او همان آزادي است. قدرت آنچه مي خواهد و قدرت آنچه نمي خواهد.<br />&quot;نيچه&quot;

  4. #44
    ApplyAbroad Veteran
    shahrouz آواتار ها
    تاریخ عضویت
    Aug 2008
    رشته و دانشگاه
    PhD, Chemical Engineering- Monash Uni- Aus
    ارسال‌ها
    2,021

    پیش فرض پاسخ : تالار اعلام زمان هاي كنفرانس هاي داخلي و خارجي به منظور فرستادن مقاله

    درود
    شكر خدا محدوديت كاربريم تموم شد. " هرچند خاطر اينكه قول داده بودم به يكي دوتا از بچه هاي فروم در رابطه با كنفرانسهاي مهندسي شيمي با يك نام كاربري ديگه وارد شدم كه از همه من جمله مديريت فروم عذر مي خوام از اين بابت "
    كنفرانسهاي شيمي و پليمر

    آلمان(18كنفرانس - شروع از7 اكتبر 2008)




    [left]
    Nanopolymers 2008
    07 Oct 2008 → 08 Oct 2008; Frankfurt am Main, Germany
    abstract: Nanopolymer technology is a fast growing field which is increasingly being applied in most industry sectors. The property changes that nanotechnology offers range from lighter weight materials, through flame retardant polymers, to functionalised surfaces which can enable anti-corrosive, anti-reflective, anti-microbial, anti-scratch composite surfaces or provide barrier properties. Sectors which are primary targets for these new nanocomposite materials are transport, energy, packaging, healthcare, construction, environment, sport, and utilities (including water and hygiene).
    Papers are invited on:
    Papers are now being invited for submission on any of the following areas:
    weblink: http://www.rapra.net/products_and_se...ence_2008.asp?

    related subject(s): Nanoscale Particles and Emulsions


    GPC/SEC training course
    09 Oct 2008 → 10 Oct 2008; Mainz, Germany
    organizer: PSS Polymer Standards Service GmbH (PSS)
    topics: This training course provides theory lectures and practical sessions for modern analysis of macromolecules using gel permeation chromatography (GPC), also known as size exclusion chromatography (SEC). It covers the theoretical background of the separation technique, gives practical advice for reproducible and accurate analysis, and shows the application advantages as well as the limitations of GPC/SEC and GPC/SEC hyphenation with light scattering, viscometry and other techniques. In the praxis sessions small workgroups (maximum 5 people) verify a GPC/SEC system, check the performance of the separation column, calibrate, and evaluate samples using different techniques. Each group has its own tutor, an experienced polymer chemist, to discuss also special applications and questions.
    After successful participation each attendee should be able to obtain results from analysis data, to qualify the condition of the analytical system and the separation columns, and to optimize the application conditions and the work flow in the lab.
    weblink: http://polymer.de/

    related subject(s): Events and Training in Chromatography (GC, HPLC, UPLC); Professional Training Events in Chemistry


    [GPC-Kurs

    13 Oct 2008 → 15 Oct 2008; Mainz, Germany
    organizer: PSS Polymer Standards Service GmbH (PSS)
    abstract: Dieser Kurs vermittelt theoretische Kenntnisse und praktische Fähigkeiten für moderne Polymeranalytik mittels Gelpermeationschromatographie (GPC) und GPC-Kopplungsmethoden (z.B. Viskosimetrie, Lichtstreuung, FTIR). Die Theorie, sowie die Möglichkeiten und Grenzen dieser Methoden werden einführend in Seminarvorträgen behandelt.
    In Arbeitsgruppen mit maximal 5 Personen pro GPC-Anlage werden praktische Übungen unter Anleitung von erfahrenen Polymerchemikern durchgeführt. Dabei werden die Gruppen nach organischen und wässrigen Applikationen unterteilt. Auch für die Beantwortung von individuellen Fragestellungen bleibt Zeit.
    Der Teilnehmer soll am Ende des Kurses in der Lage sein, Analysendaten in Ergebnisse umzusetzen sowie den Zustand der chromatographischen Anlage und die Qualität der Ergebnisse zu beurteilen.
    topics: GPC/SEC Theorie, Kalibration, korrekte Auswertung, praktische Übungen, Troubleshooting
    weblink: http://polymer.de/

    related subject(s): Events and Training in Chromatography (GC, HPLC, UPLC); Professional Training Events in Chemistry


    [ERTC Lubes and Additives Conference

    13 Oct 2008 → 15 Oct 2008; Berlin, Germany
    abstract: The impressive reputation is justly deserved. Hosted by industry professionals of the highest technical calibre, GTF events and courses are thoughtfully devised, professionally organised and, above all, efficiently managed. They provide a unique and invaluable platform for delegates to make knowledge their goal by acquiring new skills and learning about the very latest sector specific technology.
    weblink: http://www.gtforum.com/

    related subject(s): Applied Physics: Mechanics, Rheology and Tribology; Applied Chemistry: Plastics, Paints and Synthetic Materials


    Fernlehrgang 'Synthese und Strukturaufklärung organischer Verbindungen'

    03 Nov 2008 → 27 Mar 2009; Frankfurt am Main, Germany
    abstract: Zielgruppe: Mitarbeiter/-innen der chemischen und pharmazeutischen Industrie, Behörden und Institute mit Aufgabenschwerpunkt in F & E Voraussetzungen: Grundkenntnisse der Organischen Synthesechemie Ziele / Nutzen: Ein fundiertes Wissen zur Darstellung organischer Verbindungen und deren gezielte Strukturaufklärung ermöglichen jeder Fachkraft einen erweiterten Handlungs- und Entscheidungsspielraum im Labor. Die Teilnehmer erhalten umfassende Kenntnisse zur präparativen organischen Synthese sowie Analysetechniken zur direkten Anwendung im F&E-Labor anhand von anwendungsorientierten Beispielen. Inhalt: Modul 1 (6 Wochen): Reaktionen, Mechanismen, spektroskopische Methoden – Grundlagen der Aliphatenchemie •Substitutionen, Additionen, Eliminierungen, metallorganische Reaktionen •IR-Spektroskopie, NMR-Spektroskopie •Grundlagen der Stereochemie Modul 2 (6 Wochen): Carbonyl-, Amin- und Aromatenchemie - Schlüsselelemente der Feinchemie •Reaktionen von Carbonylverbindungen, Michael-Sys
    contact: Provadis Partner für Bildung und Beratung GmbH Frau Dr. Astrid Merz; phone: (+49 (0) 69 305 30017)
    related subject(s): Pharmacology and Drug Development; Biochemistry and Medicinal Chemistry


    Polymeradditive

    04 Nov 2008 → 05 Nov 2008; Frankfurt am Main, Germany
    abstract: Nahezu alle technisch wichtigen Kunststoffe sowie Lacksysteme müssen mittels Stabilisatoren während ihrer Verarbeitung und Einsatzdauer individuell gegen Abbauprozesse geschützt werden. Daneben dienen Polymeradditive der anwendungsorientierten Modifizierung von Werkstoffeigenschaften der Polymere. Bereits seit Jahrzehnten geht daher die Additiventwicklung mit der sukzessiven Entwicklung und Verbreitung technischer Kunststoffe einher. Schwerpunkte sind: * Polymerabbau - durch thermische Einflüsse auf - photochemischem Wege * Schutz von Kunststoffen durch Stabilisatoren - bei der Verarbeitung - während der Gebrauchsdauer von Kunststoffartikeln mittels - Stabilisatoren gegen thermisch induzierten Abbau - Stabilisatoren zum Schutz vor lichtinduziertem Abbau * Wirkungsweise von Polymerstabilisatoren - Mechanistische Aspekte * Wie lassen sich Wechselwirkungen von Stabilisatoren nutzbar machen? * Spezifische Kombinationen von Stabilisatoren in - Polyolefinen - anderen technischen Kuns
    weblink: http://www.gdch.de/vas/fortbildung/k...g2008.htm#4004

    contact: Gesellschaft Deutscher Chemiker e.V. Postfach 90 04 40 60444 Frankfurt am Main Deutschland; phone: (069 7917- 364 / - 291)
    related subject(s): Applied Chemistry: Plastics, Paints and Synthetic Materials


    [Kunststoffchemie - Eine Einführung

    05 Nov 2008 → 06 Nov 2008; Ladenburg, Germany
    abstract: Steigen Sie in die Grundlagen der Kunststoffchemie ein und verschaffen Sie sich einen umfassenden Überblick über Polymere, ihre Strukturen, Eigenschaften und Anwendungen und über Besonderheiten beim Recycling. -Stellen Sie den Bezug zwischen der chemischen Struktur eines Kunststoffs und den sich daraus ergebenden Eigenschaften, seiner Verarbeitungsmöglichkeiten und seinen Anwendungsbereichen her. -Profitieren Sie von exemplarischen Fallbeispielen und anschaulichen Experimenten! Grundlagen -Kleines Repetitorium der organischen Chemie -Bildungsreaktionen für Polymere – Polyreaktionen Kettenpolymerisation, Kondensationspolymerisation, Additionspolymerisation -Bindungskräfte in makromolekularen Systemen Hauptvalenzbindungen, Nebenvalenzbindungen -Molmasse und Molmassenverteilung Mittlere Molmasse, Molmassenverteilung, Kettenlänge und Polymerisationsgrad -Modifizierung von Kunststoffen Chemisches und physikalisches Modifizieren inkl. Modifizierung durch Zusatzstoffe (Additive) Vertiefung und Anwendung Kunststoffe im Überblick -Thermoplaste und thermoplastische Elastomere, Elastomere, Duroplaste, Funktionskunststoffe Einflüsse der chemischen Struktur eines Kunststoffs auf Eigenschaften, Verarbeitung und Anwendung -Rheologie (Verhalten von Kunststoffschmelzen) -Morphologie (Überstrukturen im festen Zustand) -Chrono- und Thermomechanisches Verhalten (Zeit- und Temperaturabhängiges Verhalten) -Chemische Beständigkeit -Alterungsverhalten Besonderheiten beim Recycling von Kunststoffen -Recyclingkreisläufe von Kunststoffen -Abfallwirtschaft und Recycling aus Sicht der Kunststoffindustrie -Abbaufähige, resorbierbare Kunststoffe
    weblink: http://www.kunststoffe.de/seminare


    [Weichmacher in Kunststoffen - Einsatzmöglichkeiten, Analytik und rechtliche Bewertung
    06 Nov 2008; Ladenburg, Germany
    abstract: Erfahren Sie, welche Arten von Weichmachern es gibt und wie diese hergestellt, be-wertet und in den verschiedenen Anwendungsbereichen eingesetzt werden. •Lernen Sie, welche Rolle Weichmacher bei der Formulierung von Druckfarben spielen und was dabei beachtet werden muss. •Informieren Sie sich über die Problematik von Weichmachern in Kontaktmaterialien für Lebensmittel und Spielwaren. •Erkennen Sie, wie sich die rechtlichen Regelungen in der EU und in Deutschland auf die Hersteller und Verbraucher auswirken.
    weblink: http://www.kunststoffe.de/seminare


    [Methoden der modernen organischen Fluorchemie

    20 Nov 2008 → 21 Nov 2008; Frankfurt am Main, Germany
    abstract: Durch den Workshop sollen die Teilnehmer: - Verständnis der ungewöhnlichen Eigenschaften des Fluors in verschiedensten chemischen Umgebungen erlangen - Einen aktuellen Überblick über den Einsatz von Fluorverbindungen als Wirkstoffe (v.a. Pharmaka und Agrochemikalien) und als Katalysatoren erhalten - Moderne Methoden zur selektiven Synthese organischer Fluorverbindungen erlernen - Sich neueste Verfahren zur metallorganisch vermittelten Fluorchemie aneignen - Einen Einblick in Anwendungen großer fluorierter Moleküle in der Biochemie bekommen Zielgruppe des Workshops sind in der Forschung tätige Industriechemiker und weitere an aktuellen Entwicklungen der organischen Fluorchemie interessierte Wissenschaftler. Nach einem Überblick über die ungewöhnlichen Eigenschaften von Fluor und fluorierten Verbindungen wird besonderes Augenmerk auf die Rolle von Fluorsubstituenten bei der Entwicklung von Wirkstoffen (v.a. Pharmaka und Agrochemikalien) und moderne Methoden zur selektiven Einführung vo
    weblink: http://Kursleiter: Prof. Dr. Ingo Krossing

    contact: Gesellschaft Deutscher Chemiker e.V. Postfach 90 04 40 60 444 Frankfurt am Main Deutschland; phone: (+49 69 7917-364/-291)

    [Praxisnahe Qualitätssicherung in der organischen Analytik

    25 Nov 2008 → 26 Nov 2008; Essen, Germany
    abstract: Zielsetzung In der organischen Analytik müssen u.a. chormatographische Trennverfahren validiert und akkreditiert werden, die mit verschiedenen Detektionsmethoden kombiniert sind. Die sehr allgemeinen Vorgaben der einschlägigen Akkreditierungsdokumente geben jedoch keine Auskunft darüber, wie man ein praxisnahes Qualitätskontroll ('QC')-System aufbaut und wie man eine optimale Methodenvalidierung durchführt. Eine Entwicklung von QC-Systemen nur an Hand der vorgeschriebenen Formalien und ohne Berücksichtigung des reellen Kontrollbedarfs im Labor, führt zu Routinen, die zwar QC-konform sind, aber oftmals auch schwerfällig und zeitaufwendig. Die vorgeschriebenen Kontrollen liefern zudem häufig nicht die zur Behebung eines Problems notwendige Information. QC-Routinen, die von der eingesetzten Methodik und den daraus entstehenden Anforderungen her entwickelt werden, führen zu einer Erleichterung der täglichen Arbeit durch frühzeitiges Entdecken von Abweichungen und Fehlern. Durch das Kombinieren von Kontrollroutinen mit Arbeitsvorgängen, die sowieso durchgeführt werden müssen, kann zudem Zeit eingespart werden. Mit Hilfe von Beispielen aus der organischen Spurenanalytik, die sich auch in andere Bereiche umsetzen lassen, werden Hilfen und Tips für die praxisnahe Konzipierung von QC-Systemen gegeben, welche während der einzelnen Analysenschritte ohne grossen Zusatzaufwand sowohl die vom Akkreditierungssystem benötigte Kontrollinformation liefern als auch Hinweise auf Fehlerursachen. 25 Jahre Spurenanalytik, die erste Akkreditierung eines Dioxinlabors in Europa sowie die Mitarbeit in Standardisierungsgremien der EU erlauben auf vielfältige Erfahrungen zurückzugreifen.
    weblink: http://www.hdt-essen.de/htd/veransta...-11-423-8.html

    contact: Haus der Technik Hollestr.1 45127 Essen Deutschland Herr Kai Brommann; phone: ((0201)1803-251)

    Grundlagen der Organischen Chemie für Mitarbeiter aus Produktion und Technik
    25 Nov 2008 → 28 Nov 2008; Bad Dürkheim, Germany
    abstract: Ziel des Kurses ist es, die für Mitarbeiter aus Produktion und Technik notwendigen grundlegenden Kenntnisse der Organischen Chemie zu vermitteln: - Einführung in die wichtigsten Stoffklassen und deren Herstellung, Eigenschaften und Verwendung - Sicherer Umgang mit der Nomenklatur organischer Verbindungen - Wichtige organische Großprodukte - Umgang mit gefährlichen Stoffen und Sensibilisierung für den Umweltschutz Schwerpunkte sind: - Aliphatische Stoffklassen: Alkane, Alkene, Alkine - Wichtige 'substituierte' Alkane: Alkohole, Aldehyde, Ketone, Alkansäuren, Amine - Erdöl als Ausgangsstoff für viele organische Produkte - Benzol und seine Derivate - Wichtige organische Großprodukte - Polymere/Kunststoffe Zielgruppe: Angelernte Mitarbeiter aus Produktion, Technik und Labor ohne chemische Vorkenntnisse Kursleiter: Dr. Jürgen Hocker
    weblink: http://www.gdch.de/vas/fortbildung/k...g2008.htm#4949

    related subject(s): Professional Training Events in Chemistry


    Grundlagen der Organischen Chemie für Kaufleute und Ingenieure

    09 Dec 2008 → 12 Dec 2008; Bad Dürkheim, Germany
    abstract: Ziel des Kurses ist es, die für Kaufleute und Ingenieure in der Chemischen Industrie und im Chemiehandel notwendigen grundlegenden Kenntnisse der Organischen Chemie zu vermitteln: - Einführung in die wichtigsten Stoffklassen und deren Herstellung, Eigenschaften und Verwendung - Sicherer Umgang mit der Nomenklatur organischer Verbindungen - Wichtige organische Großprodukte - Umgang mit gefährlichen Stoffen und Sensibilisierung für den Umweltschutz Schwerpunkte sind: - Aliphatische Stoffklassen: Alkane, Alkene, Alkine - Wichtige 'substituierte' Alkane: Alkohole, Aldehyde, Ketone, Alkansäuren, Amine - Erdöl als Ausgangsstoff für viele organische Produkte - Benzol und seine Derivate - Wichtige organische Großprodukte - Polymere/Kunststoffe Zielgruppe: Nicht-Naturwissenschaftler in der Chemischen Industrie und im Chemiehandel, wie z.B. Kaufleute, Sachbearbeiter, Ingenieure, Techniker, Mitarbeiter aus Umweltschutzabteilungen und Behörden Kursleiter: Dr. Jürgen Hocker Kurssprache: deutsc
    weblink: http://www.gdch.de/vas/fortbildung/k...g2008.htm#4986

    contact: Gesellschaft Deutscher Chemiker e.V. Postfach 90 04 40 60444 Frankfurt am Main Deutschland; phone: (069 7917- 364 / - 291)

    [Fluororganische Chemie in Theorie und Praxis

    16 Feb 2009 → 18 Feb 2009; Bremen, Germany
    abstract: Fluor ist ein faszinierendes Element und wird hauptsächlich in den Mineralien Fluorapatit und Fluorit gefunden. Nach seiner Isolierung durch Henri Moissan 1886 (Nobelpreis 1906) wurde es zu einer bedeutsamen Basis für chemische Forschungen, Entdeckungen und Innovationen. Heute beeinflussen fluorierte Stoffe das tägliche Leben von Millionen Menschen in positiver Weise, besonders in „quality-of-life“ Produkten, in „Health Care“ und Pflanzenschutz. Einige bekannte Beispiele sind: Anorganische Fluoride im Trinkwasser und in der Zahnpflege, gasförmige Fluoride als Ätzgase in der Halbleiterherstellung, synthetische Blutersatzstoffe, moderne Anästhetika, Kühlmittel (Klimaanlagen, Kühlschränke), „High Performance“ Kunststoffe im Haushalt, in der Bau- und Automobilindustrie, in der Raumfahrt, fluorierte Wirkstoffe in der Pharmaindustrie (Antibiotika, Antidepressiva) und im Pflanzenschutz. Fluorierte Flüssigkristallmoleküle kommen in den neuesten Displays von Computermonitoren und Mobiltelefonen zum Einsatz. Eine ganz neue Entwicklung hat sich in der Anwendung hochfluorierter organischer Substanzen für die Mikrolithographie ergeben. Ein radioaktives Isotop wird für die PET-Methode in der Medizintechnik zur Untersuchung von Herz und Gehirn verwendet.
    weblink: http://kwi.dechema.de/kwi_media/Down...scheChemie.pdf

    contact: DECHEMA e.V. Theodor-Heuss-Allee 25 60486 Frankfurt Deutschland; phone: (069 7564-253/-202)
    related subject(s): Analytical Chemistry


    [ISOM XVIII - 18th International Symposium on Olefin Metathesis and Related Chemistry
    02 Aug 2009 → 07 Aug 2009; Leipzig, Germany
    organizer: Leibniz-Institute of Surface Modification (IOM)
    abstract: The program will cover all aspects of alkene and alkyne metathesis including theory and mechanism, catalyst and initiator design, catalyst immobilization, applications in organic synthesis, polymer chemistry, medical chemistry, materials science and chemical engineering. Significant contributions will also be made from leading industry scientits, thus providing a profound insight into the current state of commercial applications of metathesis.
    weblink: http://www.isom18.com

    contact: Professor Michael R. Buchmeiser, IOM Leipzig Permoserstr.15 Leipzig D-04318 Germany

    [7th International Conference on f-Elements

    23 Aug 2009 → 27 Aug 2009; Cologne, Germany
    organizer: Universität zu Köln (Uni Köln)
    abstract: 7th International Conference on f-Elements
    weblink: http://www.icfe.de/

    contact: Prof. Dr. Gerd Meyer; phone: (+49 221 470-3262)

    [ID=128056]9. Tagung Iminiumsalze ImSaT-9

    07 Sep 2009 → 10 Sep 2009; Bartholomä-Ostalbkreis, Germany
    organizer: Hochschule Technik und Wirtschaft Aalen (HTW Aalen)
    abstract: Aktuelle Beiträge aus der Chemie der Iminiumsalze werden präsentiert.
    contact: Prof. Dr. W. Kantlehner; phone: (07361-576-2152); email: willi.kantlehner@htw-aalen.de

    [10th International Workshop on Polymer Reaction Engineering

    10 Oct 2010 → 13 Oct 2010; Hamburg , Germany
    organizer: DECHEMA Gesellschaft für Chemische Technik und Biotechnologie e.V.
    weblink: http://events.dechema.de/tagungen.html
    از میان دو واژه انسان و انسانیت؛ ‬‫اولی در میان کوچه ها‬،‫و دومی در لابلای کتابها سرگردان است‬...
    PhD positions:Switzerland*** Netherlands***Norwa

  5. #45

    پیش فرض پاسخ : تالار اعلام زمان هاي كنفرانس هاي داخلي و خارجي به منظور فرستادن مقاله

    please only send the links,so the interested people can follow them.
    This makes it possibol to send more messages per page.
    او که از من برید و ترکم کرد<br /> پس چرا پس نداد آن دل را<br />وای بر من که مفت بخشیدم<br />دل آشفته حال غافل را

  6. #46
    ApplyAbroad Veteran
    shahrouz آواتار ها
    تاریخ عضویت
    Aug 2008
    رشته و دانشگاه
    PhD, Chemical Engineering- Monash Uni- Aus
    ارسال‌ها
    2,021

    پیش فرض پاسخ : تالار اعلام زمان هاي كنفرانس هاي داخلي و خارجي به منظور فرستادن مقاله

    نقل قول نوشته اصلی توسط Partopala
    please only send the links,so the interested people can follow them.
    This makes it possibol to send more messages per page.
    درود
    اين كنفرانس ها جداگانه و درسايت ها و در صفحات مجزا آورده شده. من ابتدا تمام اونها رو مرتب مي كنم در يك فايل ورد ويرايش مي كنم. در نهايت به تفكيك گرايش ميارم. در هر حال اگر فكر مي كنيد به اين صورت بهتره من لينكها رو مي زارم.
    conferencealerts.com
    allconferences.com
    www.slac.stanford.edu/spires/conferences
    www.medicalconferences.com
    www.chemicals-technology.com/exhibitions
    www.chemistry-conferences.com
    www.aiche.org/conferences
    ممنون
    از میان دو واژه انسان و انسانیت؛ ‬‫اولی در میان کوچه ها‬،‫و دومی در لابلای کتابها سرگردان است‬...
    PhD positions:Switzerland*** Netherlands***Norwa

  7. #47
    ApplyAbroad Veteran
    shahrouz آواتار ها
    تاریخ عضویت
    Aug 2008
    رشته و دانشگاه
    PhD, Chemical Engineering- Monash Uni- Aus
    ارسال‌ها
    2,021

    پیش فرض پاسخ : تالار اعلام زمان هاي كنفرانس هاي داخلي و خارجي به منظور فرستادن مقاله

    درود
    البته يك كار ديگه هم مي شه كرد. من اين كنفرانس ها رو به صورت فايل pdf در ميارم . آپلود مي كنم.
    از میان دو واژه انسان و انسانیت؛ ‬‫اولی در میان کوچه ها‬،‫و دومی در لابلای کتابها سرگردان است‬...
    PhD positions:Switzerland*** Netherlands***Norwa

  8. #48
    Junior Member
    تاریخ عضویت
    Aug 2008
    ارسال‌ها
    4

    پیش فرض پاسخ : تالار اعلام زمان هاي كنفرانس هاي داخلي و خارجي به منظور فرستادن مقاله

    پنجمین کنفرانس داخلی مدیریت فناوری اطلاعات و ارتباطات:

    29و 30 بهمن 1387 - سالن همايش های بين المللی هتل المپيك
    فرصت ارسال اصل مقالات تا 30 آذر ماه 1387 می باشد.
    http://www.ictm.ir
    With money you can buy house but you can&#39;t buy home

  9. #49
    ApplyAbroad Champion

    تاریخ عضویت
    Sep 2008
    رشته و دانشگاه
    Comp. Eng
    ارسال‌ها
    1,662

    پیش فرض پاسخ : تالار اعلام زمان هاي كنفرانس هاي داخلي و خارجي به منظور فرستادن مقاله

    هفدهمین کنفرانس مهندسی برق که امسال در دانشگاه علم و صنعت برگزار میشه.

    17th Iranian Conference Electrical Engineering

    Department of Electrical Engineering

    Iran University of Science and Technology (IUST)

    12-14 May 2009

    Note :

    Papers may be submitted in on of the folowing main areas of electrical engineering

    1- Electronics

    2- Control

    3- Power

    a-power systems

    b- Electrical machines and power electronics

    4- Computer

    5- Communications

    a- System

    b- Field

    c- Information Technology

    6- Biomedical Engineering

    Important Dates

    Full paper submission until 7 Dec. 2008
    Special session proposal submission until 7 Dec. 2008
    Workshop proposal submission until 5 Feb. 2009
    Acceptance Notification until 13 Feb. 2009
    Early bird Registration until 5 March 2009
    Camera ready papaers until 15 March 2009
    ICEE 2009 Conference 12-14 May 2009



    Phone : +98 21 77240355

    Tel/Fax : +98 21 77240354

    Email : 2009@icee.ir

    Address: Department of Electrical Engineering

    Iran university of science and technology

    Narmak, Tehran, Iran

  10. #50
    Member
    تاریخ عضویت
    Sep 2007
    رشته و دانشگاه
    Malaysia
    ارسال‌ها
    317

    پیش فرض پاسخ : تالار اعلام زمان هاي كنفرانس هاي داخلي و خارجي به منظور فرستادن مقاله

    نخستین همایش ملی مهندسی اپتیک و لیزر ایران اردیبهشت ماه سال ۱۳۸۸ در دانشگاه صنعتی مالک اشتر

    محورهای این همایش عبارتند از: طراحی و ساخت سامانه های اپتیکی، اپتو الکترونیکی و لیزری- طراحی و ساخت منابع تغذیه لیزر - اسپکتروسکوپی لیزری - ساخت ادوات فوتونیکی - کاربردهای نوری نانو ساختارها- کاربردهای صنعتی، نظامی، پزشکی و زیست محیطی لیزر.

    دبیرخانه همایش با انتشار شماره تلفن ۵۹۱۲۴۳۶-۰۳۱۲ و تلفکس ۵۲۳۰۲۰۸-۰۳۱۲ ، وب سایت: http://www.mut-es.ac.ir و ایمیل: ncole@mut-es.ac.ir آمادگی خود را برای پاسخگویی به تمامی علاقه مندان اعلام کرده است.

علاقه مندی ها (Bookmarks)

علاقه مندی ها (Bookmarks)

مجوز های ارسال و ویرایش

  • شما نمیتوانید موضوع جدیدی ارسال کنید
  • شما امکان ارسال پاسخ را ندارید
  • شما نمیتوانید فایل پیوست در پست خود ضمیمه کنید
  • شما نمیتوانید پست های خود را ویرایش کنید
  •