صفحه 1 از 5 12345 آخرینآخرین
نمایش نتایج: از شماره 1 تا 10 , از مجموع 42

موضوع: فرصت های شغلی رباتیک

  1. #1
    ApplyAbroad Hero robotic آواتار ها
    تاریخ عضویت
    Dec 2008
    رشته و دانشگاه
    مهندسی
    ارسال‌ها
    1,524

    پیش فرض فرصت های شغلی رباتیک

    Possible permanent position at INRIA
    Sophia-Antipolis: assistance robotics



    INRIA is offering 3 permanent positions of young graduate scientists
    at Sophia-Antipolis. Although this is a competitive selection, the
    COPRIN project-team is seeking one applicant in the field of assistance
    robotics for frail people. You should have a PhD in robotics (or related
    fields) and preferably have been through a post-doc. You may join a team
    of about 12 people working in this field, with extensive test platforms
    (5 parallel robots, a fully instrumented flat, access to an immersive
    room) that are described at

    http://www-sop.inria.fr/coprin/prototypes/main.html

    with the guidelines describing our research at

    http://www-sop.inria.fr/coprin/appli...tance_eng.html

    We have also a strong collaboration with local and national hospitals.

    Possible applicants should send their cv at Jean-Pierre.Merlet@inria.fr.
    The deadline for submitting an application is February 18.
    هرکه را اسرار حق آموختند
    مهر کردند و دهانش دوختند

  2. #2
    ApplyAbroad Hero robotic آواتار ها
    تاریخ عضویت
    Dec 2008
    رشته و دانشگاه
    مهندسی
    ارسال‌ها
    1,524

    پیش فرض پاسخ : فرصت های شغلی رباتیک

    job opportunity at Honda RI

    Area: Controller for Autonomous Vehicle


    Lab: Honda Research Institute USA (HRI-US) is at the cutting edge of
    Honda's research and development activities.
    We pursue emerging technologies in the areas of Robotics, Computer Vision
    and Machine Learning.
    Our Lab is located in Silicon Valley.

    Job Description:
    The successful applicant will be part of a team that builds a small
    four-wheeled vehicle that can drive fully autonomously.
    His/her main responsibility is to add a PhidgetSBC board, Phidgets motor
    controllers, and Phidgets I/O boards to the vehicle to control velocity and
    steering angle.

    Qualifications:
    required:
    ?B.S. degree in either EE, CS, Mechanical Engineering, or equivalent
    ?Experience with Phidgets boards, Linux, C programming
    desired:
    ?Knowledge of robotics, vehicle control, CAN bus

    Duration: up to 6 months (min. of 10h/week) starting now

    Contact:
    send applications to Bernd Heisele, BHeisele@honda-ri.com

    --
    Lorenzo Riano, PhD
    Research Scientist
    EECS
    University of California Berkeley
    Berkeley, CA
    94720

    web: http://www.eecs.berkeley.edu/~riano/
    email: lorenzo.riano@berkeley.edu
    skype: lorenzo.riano
    هرکه را اسرار حق آموختند
    مهر کردند و دهانش دوختند

  3. #3
    ApplyAbroad Hero robotic آواتار ها
    تاریخ عضویت
    Dec 2008
    رشته و دانشگاه
    مهندسی
    ارسال‌ها
    1,524

    پیش فرض پاسخ : فرصت های شغلی رباتیک

    Robotics engineer position in Paris, France

    The ISIR (Paris, France) is seeking a robotics/mechanical engineer for developing mobile, wheel-legged robots. The position is available immediatly.

    Thanks to a recently awarded grant, our team is developing innovative algorithms to allow robots to adapt autonomously to unforeseen situations (mechanical failures, radical changes of the ground surface, etc.). In the framework of this project, we are seeking a robotic engineer who will have in charge the design of new wheel-legged hybrid robots. This includes proposing mechanical solutions, CAD design, basic electronic design and interface with the ROS ``meta operating system''.

    The ideal candidate will have a passion for robotics and beautifully designed robots. He will work closely with one associate professor, one PhD. student and one post-doc.

    This is a one-year, full-time position starting in February/March 2013.

    * Requirements
    - MS in robotics (or French engineering school), mechatronics or equivalent field
    - Demonstrated ability to design a full robot, from CAD design to interface with a computer

    * Details
    Please submit a resume, a cover letter and any supporting material (e.g. photos of designed robots) to mouret@isir.upmc.fr. Documents can be in French or in English.


    * About the lab
    Our group is focused on adaption and cognition for robots. It is part of the ISIR (Institute for Robotics and Intelligent Systems), one of the main robotics department in France, which is in the University Pierre and Marie Curie (UPMC). We are located in the center of Paris, France.


    * About the project
    The Creadapt project aims at harnessing both the creative and the adaptive abilities of evolutionary algorithms to power software that can autonomously and creatively adapt the behavior of robots to unforeseen situations. In the typical scenario, a mobile robot faces a situation that requires adaptation (e.g. a leg is broken or the ground surface changed). The robot launches a few experiments to investigate the situation; after a few minutes it should be able to cope with the new situation to pursue its mission until a new adaption is required. Our new algorithms will be demonstrated on wheel-legged hybrid robots because these robots can move in many different ways.

    * Links
    - http://www.upmc.fr
    - http://isir.upmc.fr
    - http://people.isir.upmc.fr/mouret

    --
    Jean-Baptiste Mouret
    http://people.isir.upmc.fr/mouret


    هرکه را اسرار حق آموختند
    مهر کردند و دهانش دوختند

  4. #4
    ApplyAbroad Hero robotic آواتار ها
    تاریخ عضویت
    Dec 2008
    رشته و دانشگاه
    مهندسی
    ارسال‌ها
    1,524

    پیش فرض پاسخ : فرصت های شغلی رباتیک

    Robotics engineer positions available at Nest Labs


    Nest Labs (http://www.nest.com) is building technology for a better living
    environment at home. We are looking for people with robotics, controls,
    sensors, signals and systems, machine learning, multi-agents, computer
    vision, or human-machine interface backgrounds who are interested in being
    part of a fast moving startup considered one of the hottest companies in
    Silicon Valley.

    Nest Labs founders are Tony Fadell, a godfather of the iPod, and Matt
    Rogers, who shipped numerous versions of iPod/iPhone. The Nest Labs
    Technology is led by Yoky Matsuoka, previously a faculty member at CMU and
    University of Washington working at the intersection of robotics and
    neuroscience (and yes, this kind of background is perfect for working at
    Nest).

    Example skills/tool exposure we are looking for:
    Strong quantitative skills and experience with MATLAB, R, or equivalent
    tools for simulation or data analysis/visualization.
    Extensive knowledge of C/C++ or Python.
    Experience working with real hardware for controls, data
    collection/visualization/validation, continuous signal processing, image
    analysis, and modeling
    No requirement for prior exposure or knowledge in home technology,
    heating/cooling devices, building science, etc.

    To learn more about:
    User experience: http://www.nest.com/living-with-nest/
    Motivation and how we save energy: http://www.nest.com/saving-energy/
    Learning features: http://www.nest.com/inside-and-out/
    Reviews and awards: http://www.nest.com/reviews/

    If you are interested in working at Nest, contact Jose Cong <
    jose@nestlabs.com>.

    هرکه را اسرار حق آموختند
    مهر کردند و دهانش دوختند

  5. #5
    ApplyAbroad Hero robotic آواتار ها
    تاریخ عضویت
    Dec 2008
    رشته و دانشگاه
    مهندسی
    ارسال‌ها
    1,524

    پیش فرض پاسخ : فرصت های شغلی رباتیک

    Aldebaran Robotics is recruiting a repair & support engineer in Boston

    ALDEBARAN ROBOTICS
    www.aldebaran-robotics.com

    ROBOTICS REPAIR AND SUPPORT ENGINEER, Americas Region (based in Boston)

    Aldebaran Robotics is a fast-growing, Paris-based company with 240
    employees and a mission to create interactive robots for the development
    and well-being of humans. Aldebaran?s NAO humanoid robot was named the
    best robot for education, as judged by the Robot Hall of Fame and Carnegie
    Mellon University. Over 3,000 NAOs are in service at universities,
    research centers and high schools around the world, used primarily as a
    research and teaching platform for computer science, robotics, mathematics
    and other disciplines.

    Occasionally our robots need maintenance and repair and our users need
    support, and our rapidly-growing installed base requires that we hire
    additional technical resources at our Boston office.

    Primary Function:
    ? You will make repairs to NAO humanoid robots, ranging from changing
    gears and rewiring cables to replacing complex structures
    ? You will also assist with technical training sessions for
    distributors and end-customers
    ? You will provide assistance at trade shows and special events,
    including execution of multi-robot demonstrations and shows
    ? You will interact with the global repair community, including
    sharing advice on repair techniques and seeking advice when required
    ? Depending on abilities and needs, you will also provide software
    support.

    Requirements:
    ? Bachelors degree in Electrical/Computer Engineering, Computer
    Science, or a related discipline
    ? Technical robotics experience
    ? Electronics experience, including soldering
    ? Troubleshooting and critical thinking skills
    ? Familiarity with Unix/Linux-based operating systems
    ? Programming experience, especially Python and C++
    ? An understanding of the different technologies embedded in the robot
    (visual and audio sensors, motors, sonar, etc.)
    ? Oral and written communication skills to explain complex technical
    problems and solutions
    ? Desire to help customers with their technical issues
    ? Teamwork skills to succeed in a young and fast-paced environment
    ? Ability to lift up to 45 lbs.
    ? Comfortable working in an office space that?s relatively confined
    ? French language skills a plus

    Position is open immediately, full-time and salaried with a competitive
    benefits package, based in Boston at the Aldebaran offices in the South End
    (Congress Street).

    Please send resume and letter of motivation to:
    Andrew Stout (astout@aldebaran-robotics.com) and
    Eric Stevenson (estevenson@aldebaran-robotics.com)

    --
    Andrew Stout

    Field Application Robotics Engineer - Aldebaran Robotics
    email: astout@aldebaran-robotics.com
    phone (google voice): (760) 9 DEV NAO == (760) 933-8626
    374 Congress St, Suite 507, Boston MA 02210





    هرکه را اسرار حق آموختند
    مهر کردند و دهانش دوختند

  6. #6
    ApplyAbroad Hero robotic آواتار ها
    تاریخ عضویت
    Dec 2008
    رشته و دانشگاه
    مهندسی
    ارسال‌ها
    1,524

    پیش فرض پاسخ : فرصت های شغلی رباتیک

    Robotics Engineering Positions at FANUC Robotics

    Fanuc Robotics America - the largest robotics vendor in North America
    has openings for a robotics Software Product Development Engineer and a
    Vision Product Development Engineer. To apply for these positions
    please visit Fanuc's web site: http://www.fanucrobotics.com

    ------------------------------
    SOFTWARE PRODUCT DEVELOPMENT ENGINEER
    ----------------------------

    FANUC Robotics America, the leader in designing, engineering and
    manufacturing innovative robots and robotic systems that impact business
    performance for global customers currently has an opportunity for a
    Software Product Development Engineer to join our team. Primary
    responsibilities will include:

    - Specific development of core system software within an embedded real
    time operating system environment to Real-time operating systems and
    file systems, Program execution environments and User Interface software
    using state of the art web based and OpenGL technologies

    - Specification, design, implementation of software developments or
    software enhancements to existing products

    - Development and implementation of product tests and product test
    procedures.

    - Development of product documentation.

    - Communication with other engineering staffs on product and development
    related issues.

    - Present a proposed product concept to selling division and select
    customers.

    - Specific Software Development can include User Interface software
    design, Application development of embedded system applications in "C"
    and web technologies, Database tool development and Web browser related
    development.


    Ideal candidate will have the following experience and education:

    - Bachelor degree in Engineering (Electrical or Computer Engineering
    major preferred) or equivalent relevant work experience

    - Significant academic and/or practical development experience in User
    Interface software and/or operating systems.

    - Strong ANSI-C language coding skills and experience with large project
    software development environment (configuration management, build/release)

    - Specific experience in one or more of the following areas:
    * User interface development for embedded applications
    * Embedded applications with an understanding of the underlying
    operating system and software development environment.
    * Web Brower or Graphical Display Engine Development
    * Web based user interface tools ( ex. JavaScript, JQuery, Ajax, NAPI)

    We offer outstanding professional opportunities and a competitive
    compensation and benefits package. To apply for this position please
    visit our website at:

    http://www.fanucrobotics.com
    FANUC Robotics America Corporation
    3900 W. Hamlin Road
    Rochester Hills, MI 48309
    An Equal Opportunity Employer


    ------------------------------------------------------------
    VISION PRODUCT DEVELOPMENT ENGINEER
    ------------------------------------------------------------

    FANUC Robotics America, the leader in designing, engineering and
    manufacturing innovative robots and robotic systems that impact business
    performance for global customers currently has an opportunity for a
    Vision Product Development Engineer to join our team. Primary
    responsibilities will include:

    - Develop, support, and test machine vision software within an embedded
    real time operating system environment. The machine vision software
    includes:
    * 2-D, 3-D image processing algorithms and tools
    * User Interface software using state of the art web based and OpenGL
    technologies

    - Specification, design, implementation of software developments or
    software enhancements to existing products.

    - Development of product documentation.

    - Communication with other engineering staffs on product and development
    related issues.

    - Support and Develop Specific to Machine Vision - Lighting and optics
    for industrial applications, User Interface and Image processing
    software design and Application development of robust industrial vision
    applications

    - Specific Software Development can include User Interface software
    design, Application development of robust industrial vision applications
    in "C" and web technologies

    - Development and implementation of product tests and product test
    procedures.


    Ideal candidate will have the following experience and education:

    - Bachelor degree in Engineering (Electrical or Computer Engineering
    major preferred) or Physics or equivalent relevant work experience

    - Significant academic and/or practical development experience in vision
    software, machine vision algorithms and vision applications.

    - Strong ANSI-C language coding skills and experience with large project
    software development environment (configuration management, build/release).

    - Experience with basic machine vision operation and construction

    - Experience in using state of the art vision technology in machine
    guidance environments.

    We offer outstanding professional opportunities and a competitive
    compensation and benefits package. To apply for this position please
    visit our website at:

    http://www.fanucrobotics.com

    FANUC Robotics America Corporation
    3900 W. Hamlin Road
    Rochester Hills, MI 48309
    An Equal Opportunity Employer
    هرکه را اسرار حق آموختند
    مهر کردند و دهانش دوختند

  7. #7
    ApplyAbroad Hero robotic آواتار ها
    تاریخ عضویت
    Dec 2008
    رشته و دانشگاه
    مهندسی
    ارسال‌ها
    1,524

    پیش فرض پاسخ : فرصت های شغلی رباتیک

    Robotics Engineer post available: University of Birmingham, UK


    The Intelligent Robotics Laboratory at the University of Birmingham is
    seeking a Robotics Engineer and Designer. This post will lead procurement, design,
    maintenance and development of advanced robot hardware and software, with ultimate
    responsibility for the full range of design from mechanical and
    electrical through to control and low level software. You will also be responsible for
    management of the robotics laboratory. You should have a degree in Engineering, Computing,
    Physics, or a closely related subject, and graduate experience in some aspect of robot
    design. In particular the successful candidate will have:

    - Strong mechanical design and systems integration skills
    - Knowledge of CNC machining, PCB prototyping and production
    - Knowledge of several of: computer aided design; circuit design;
    control systems;
    real-time or embedded software development; microcontroller
    programming;
    software development in C/C++; instrumented experimentation;
    software engineering;
    finite element analysis/numerical modelling of physical systems
    - Skilled use of mechanical computer aided design software (e.g.
    SolidWorks); Linux,
    Windows, MacOSX; real-time operating systems.

    The Intelligent Robotics Laboratory has 20 researchers and is active in
    several areas of
    robotics. The appointment is part of a university investment in
    robotics as part of the
    Centre for Computational Neuroscience and Cognitive Robotics (CN-CR).

    Informal Enquiries should be made to Dr Jeremy L Wyatt
    (j.l.wyatt@cs.bham.ac.uk) and
    Dr Michael Mistry (m.n.mistry@cs.bham.ac.uk) in the first instance.

    Formal applications for the fellowship must also be submitted via the
    University. To
    download the details and submit an electronic application online visit:
    www.hr.bham.ac.uk/jobs . Click on the current vacancies link. Then type
    the reference
    number below into the search box to retrieve the necessary details.

    Reference: 43996
    Closing date: 6 March 2013

    --
    Dr Jeremy L Wyatt
    Reader in Robotics and Artificial Intelligence
    School of Computer Science
    University of Birmingham
    www.cs.bham.ac.uk/~jlw || +44 121 414 4788
    هرکه را اسرار حق آموختند
    مهر کردند و دهانش دوختند

  8. #8
    ApplyAbroad Hero robotic آواتار ها
    تاریخ عضویت
    Dec 2008
    رشته و دانشگاه
    مهندسی
    ارسال‌ها
    1,524

    پیش فرض پاسخ : فرصت های شغلی رباتیک

    Jobs at the Swiss AI Lab IDSIA: Postdocs & PhD


    We are seeking postdocs and PhD students for exciting research
    projects on robotics and machine learning, including one on novel
    touch-based user interfaces and biological processes responsible for
    touch.

    Highly competitive salary at the award-winning Swiss AI Lab IDSIA http://www.idsia.ch/
    in the world's leading science nation http://www.idsia.ch/~juergen/switzerland.html

    Please follow instructions under http://www.idsia.ch/~juergen/eu2013.html

    Juergen Schmidhuber http://www.idsia.ch/~juergen/whatsnew.html


    هرکه را اسرار حق آموختند
    مهر کردند و دهانش دوختند

  9. #9
    ApplyAbroad Hero robotic آواتار ها
    تاریخ عضویت
    Dec 2008
    رشته و دانشگاه
    مهندسی
    ارسال‌ها
    1,524

    پیش فرض پاسخ : فرصت های شغلی رباتیک

    Hi-tech Robotic Systemz Limited, India

    Hi-Tech Robotic Systemz Limited (HRSL), established in 2004, develops and
    deploys leading-edge robotics, computer vision and artificial intelligence
    solutions. As one of India?s first mobile robotics and AI ventures, we are
    committed towards the development of cutting edge products & solutions in
    areas like:


    - Unmanned Systems like UGV, ROV, UAV, etc.
    - Robotics & Artificial Intelligence.
    - Industrial Automation and Material Handling (Bulk & Unit).
    - Military Grade Strategic Electronics and Embedded Systems.
    - Autonomous Navigation & Planning.

    *Description*

    Currently a team of approximately 30 highly skilled individuals, both
    Indian and foreign, form the core research team, and we are looking to fill
    in a position for a senior engineer / researcher. The successful candidate
    will work on activities that cover the complete development life cycle for
    a range of internally funded R&D as well as customer oriented and
    specifically tailored robotics projects. The work will include:


    - The design and development of complete robotic systems for various
    applications, particularly suited for activities with little to no human
    supervision.
    - The design and development of software architecture for mobile robotic
    platforms, as well as algorithms for 3D perception, localization and
    mapping and computer vision.
    - The design and development of human robot interfaces.
    - The technical lead for various R&D projects.

    The position is located in our offices in Gurgaon (India), and will involve
    some travel with short collocation periods for working with various
    customers.

    *Qualifications*

    Master's or PhD degree in Robotics, Computer Science, Artificial
    Intelligence, Electrical Engineering, Mechanical Engineering, Aerospace
    Engineering or in another discipline relevant to the position and at least
    2 years relevant work experience in the field.**


    - Proficiency in software programming (C++) and formal methods (UML,
    design patterns).
    - Hands-on experience with mobile robotics platforms and sensors.
    - Hands-on experience with the following: Qt, OpenCV, ROS, scene graphs.
    - Hands-on experience designing and implementing algorithms for at least
    one of: Kalman filters, SLAM, perception, path planning and tracking,
    control, computer vision.
    - Experience with the following is optional, but would be beneficial for
    the position: physics engines, JAUS, MIL vs industrial standards, realtime
    operating systems, embedded systems.

    Please send applications to
    rares.ambrus@hitechroboticsystemz.com<rares.ambrus@hitechrobobticsystemz.com>
    and
    include a CV and a cover letter, in English. Please keep the attachment
    size < 2MB.

    Thank you,

    *--
    Rares Andrei Ambrus
    Project Manager
    Hitech Robotic Systemz Ltd.
    Gurgaon(NCR), India.

    tel. +91 95609 20368
    fax. +91 124 4715398*
    هرکه را اسرار حق آموختند
    مهر کردند و دهانش دوختند

  10. #10
    ApplyAbroad Hero robotic آواتار ها
    تاریخ عضویت
    Dec 2008
    رشته و دانشگاه
    مهندسی
    ارسال‌ها
    1,524

    پیش فرض پاسخ : فرصت های شغلی رباتیک

    Four Job Openings at EndoMaster (medical robotics company) in Singapore

    EndoMaster Pte Ltd. is a medical robotics startup based in Singapore.
    It is developing a novel robot-assisted surgical system that will
    significantly advance current flexible endoscopic surgeries and enable
    surgeons to perform incision-less surgery that could only be
    performed by open or laparoscopic surgery before. EndoMaster has
    tested its prototypes on several patients with very positive results.
    The world?s first flexible endoscopy robotic surgery in the stomach
    was successfully performed. Safety, precision, and ease of use were
    significantly improved with the robotic system.

    The EndoMaster team is made up of experienced medical device
    professionals, engineers, and clinicians specializing in
    Gastrointestinal Endoscopy. The company currently has multiple job
    openings (1 Senior R&D Engineer, 2 R&D Engineers, and 1 Firmware
    Engineer) and is seeking candidates with strong motivation and
    initiative, and experience in working in robotics / medical device
    companies. All positions are available immediately. The reviewing
    process will continue until the positions are filled. Salary and
    benefits are dependent on the experience and education level of the
    applicant. The job will be based in Singapore.

    If interested, please send a cover letter and resume to Colin Tan
    (colin.tan@endomastermedical.com) and reference "Senior R&D
    Engineer", "R&D Engineer", or "Firmware Engineer" in the subject.


    EndoMaster Pte Ltd.
    http://endomaste<wbr>rmedical.com

    -----
    TITLE:
    Senior R&D Engineer

    SUMMARY:
    This position involves leading and participating in the design and
    development of EndoMaster's robot-assisted surgical system in support
    of company?s strategic plan.


    PRINCIPAL DUTIES AND RESPONSIBILITIES:
    1. Lead engineering team in design and development of medical systems
    on time and on budget
    2. Effectively communicate work with management and the team
    3. Work closely with a multidisciplinary team (R&D, Clinical
    Affairs, Quality Assurance, Regulatory and Marketing departments) to
    coordinate pilot production of new products and accomplish tasks
    4. Apply mechanical engineering knowledge to the design and
    development of new products as well as product changes and
    enhancements which are consistent with a zero defect level
    5. Solve mechanical engineering problems at the component level
    through thorough evaluation and troubleshooting
    6. Conduct testing utilizing new and existing test protocols
    7. Generate written reports that can clearly contribute to the Design
    History File
    8. Complete product enhancement projects in a manner consistent with
    corporate objectives
    9. Contribute to the company?s intellectual property position via
    invention and patent applications
    10. Create procedures for assembly, inspection and testing of devices
    11. Oversee and participate in the pilot and later stage production of
    the device
    12. Maintain accurate documentation of concepts, designs, drawings,
    and processes
    13. Maintain current knowledge of competitive technologies in
    addition to medical, technical, and biomedical developments related
    to company products
    14. Provide mechanical engineering and technical support of products
    introduced into both the domestic and international markets as well
    as physician in-service programs
    15. Provide engineering support in the resolution of product
    complaints and/or safety issues
    16. Oversee outside vendors and consultants as required
    17. Maintain GMP systems, including production quality assurance
    procedures, pre-clinical testing programs and post-production GMP
    compliance in coordination with the Document Control, Clinical, and
    Quality Assurance functions
    18. Support company goals and objectives, policies and procedures,
    Good Manufacturing Practices, and European and FDA regulations

    QUALIFICATIONS (EDUCATION, EXPERIENCE, SKILLS):
    * Bachelor's or Master's degree in Mechanical Engineering or related
    field with working knowledge of SolidWorks
    * Finite Element Analysis knowledge is a plus
    * 5 years or more of industry experience in engineering field
    * Robotics and/or medical device experience preferred


    -----
    TITLE:
    R&D Engineer

    SUMMARY:
    Use mechanical engineering knowledge to design, develop, and
    manufacture EndoMaster's robot-assisted surgical system in support of
    company?s strategic plan.
    PRINCIPAL DUTIES AND RESPONSIBILITIES:
    1. Apply mechanical engineering knowledge to the design and
    development of new products as well as product changes and
    enhancements which are consistent with a zero defect level
    2. Solve mechanical engineering problems at the component level
    through thorough evaluation and troubleshooting
    3. Conduct testing utilizing new and existing test protocols
    4. Generate written reports that can clearly contribute to the Design
    History File
    5. Effectively communicate work with management and the team
    6. Work closely with a multidisciplinary team (R&D, Clinical
    Affairs, Quality Assurance, Regulatory and Marketing departments) to
    coordinate pilot production of new products and accomplish tasks
    7. Complete product enhancement projects in a manner consistent with
    corporate objectives
    8. Contribute to the company?s intellectual property position via
    invention and patent applications
    9. Create procedures for assembly, inspection and testing of devices
    10. Oversee and participate in the pilot and later stage production of
    the device
    11. Maintain accurate documentation of concepts, designs, drawings,
    and processes
    12. Design and/or implement fixtures and equipment to aid in device
    assembly
    13. Maintain current knowledge of competitive technologies in
    addition to medical, technical, and biomedical developments related
    to company products
    14. Provide mechanical engineering and technical support of products
    introduced into both the domestic and international markets as well
    as physician in-service programs
    15. Provide engineering support in the resolution of product
    complaints and/or safety issues
    16. Assign work to technicians and temporary workers as needed
    17. Oversee outside vendors and consultants as required
    18. Maintain GMP systems, including production quality assurance
    procedures, pre-clinical testing programs and post-production GMP
    compliance in coordination with the Document Control, Clinical, and
    Quality Assurance functions
    19. Support company goals and objectives, policies and procedures,
    Good Manufacturing Practices, and FDA regulations

    QUALIFICATIONS (EDUCATION, EXPERIENCE, SKILLS):
    * Bachelor's or Master's degree in Mechanical Engineering or related
    field with working knowledge of SolidWorks
    * Finite Element Analysis knowledge is a plus
    * 2-5 years of industry experience in engineering field
    * Robotics and/or medical device experience preferred

    -----
    TITLE:
    Firmware Engineer

    SUMMARY:
    Use software engineering knowledge to design, develop software systems
    for EndoMaster's robot-assisted surgical system in support of
    company?s strategic plan.
    PRINCIPAL DUTIES AND RESPONSIBILITIES:
    1. Apply software engineering knowledge to the design and
    development of new products as well as product changes and
    enhancements which are consistent with a zero defect level
    2. Solve software/firmware problems through thorough evaluation and
    troubleshooting
    3. Assemble and test a real-time capable system platform for product
    control and testing
    4. Generate written reports that can clearly contribute to the Design
    History File
    5. Effectively communicate work with management and the team
    6. Work closely with a multidisciplinary team (R&D, Clinical
    Affairs, Quality Assurance, Regulatory and Marketing departments) to
    coordinate pilot production of new products and accomplish tasks
    7. Complete product enhancement projects in a manner consistent with
    corporate objectives
    8. Contribute to the company?s intellectual property position via
    invention and patent applications
    9. Create procedures for implementation and testing of devices
    10. Participate in software implementation for the pilot and later
    stage production of the device
    11. Maintain accurate documentation of concepts, hardware, programs,
    and processes
    12. Design and oversee firmware for each stage of the system
    13. Maintain current knowledge of competitive technologies in
    addition to medical, technical, and biomedical developments related
    to company products
    14. Provide software engineering and technical support of products
    introduced into both the domestic and international markets as well
    as physician in-service programs
    15. Provide engineering support in the resolution of product
    complaints and/or safety issues
    16. Oversee outside vendors and consultants as required
    17. Support company goals and objectives, policies and procedures,
    Good Manufacturing Practices, and FDA regulations

    QUALIFICATIONS (EDUCATION, EXPERIENCE, SKILLS):
    * Bachelor's or Master's degree in Computer Science, Electrical
    Engineering, or related field with a deep understanding of real-time
    operating systems with extensive experience of real-time programming
    * 2-5 years of industry experience in engineering field
    * Proficient in C Programming Language
    * UDP/IP, CANOpen, microcontroller programming experience is a plus
    * Must have gone through at least one whole product design process
    * Experience with UL 2601/IEC60601 is advantageous
    * Robotics experience and basic knowledge in control preferred
    هرکه را اسرار حق آموختند
    مهر کردند و دهانش دوختند

صفحه 1 از 5 12345 آخرینآخرین

علاقه مندی ها (Bookmarks)

علاقه مندی ها (Bookmarks)

مجوز های ارسال و ویرایش

  • شما نمیتوانید موضوع جدیدی ارسال کنید
  • شما امکان ارسال پاسخ را ندارید
  • شما نمیتوانید فایل پیوست در پست خود ضمیمه کنید
  • شما نمیتوانید پست های خود را ویرایش کنید
  •